WARNING Do not dispose of unit in fire or water. • Never attempt to
disassemble and reassemble. • Waste electrical products should not
be disposed of with household waste, please recycle where facilities
exist. • Check with your local authority for recycle advice.
• Keep your device and all accessories out of the reach of children
and animals. • Small parts may cause choking or serious injury if
swallowed. • Avoid exposing your device to very cold or very hot
temperatures (below 0˚C or above 45˚C). • Extreme temperatures can
cause deforming of the device and reduce the charging capacity and
life of your device. • Do not allow your device to get wet—liquids can
cause serious damage. • Do not handle your device with wet hands.
Automatic Synchronizing
• When the earphones are removed from the case they will
automatically turn ON and sync to each other. If they have
previously been paired to your device they will also
automatically re-connect.
• You are now ready to pair to your device.
Pairing with Your Devices
• Look for "LESTWSBK" or "LESTWSWH" on your device (phone,
tablet, etc.) and select it to connect.
• You will hear a voice prompt, and the second earphone LED
indicator will stop flashing.
• You are now connected.
Pairing Just One Earphone with Your Devices
• Take either one of the earphones out from the charging case,it is
automatically turned on. The LED indicator on the earphone
stem flash in red/blue.
• Look for "LESTWSBK" or "LESTWSWH" on your device (phone,
tablet, etc.) and select it to connect.
• You will hear a voice prompt, and the earphone LED indicator
will stop flashing.
• You are now connected.
NOTES:
Earphones will automatically turn OFF if there is no operation for 3
minutes after switching on.
Phone Calls
When there is an incoming call, the unit will pause the playback and
ring to alert you of the call. To answer the call, press either of the
earphone power buttons. To end a call, press either of the earphone
power buttons again.
To decline an incoming call, press and hold either power button for 2
seconds.
Controlling Playback
Press either the left or right earphone power button once to pause
playback, press either earphone power button once again to resume
playback. Press and hold left power button for 2 seconds for previous
song, right power button for 2 seconds to play next song.
Assistant Function
These earphones work with most common phone assistants. Once
connected to a mobile phone with an assistant feature, press either
earphone power button 4 times in quick succession to activate the
assistant feature of your phone.
Battery Charging (Charging Case)
• Connect the USB-C charging cable into the socket on the
charging case.
• Plug the cable into a standard USB 5V power output.
• The red LED indicator will flash while the case is charging and
will then stay on when fully charged.
(
Note:
Before using the
charging case for the first time, we recommend you fully charge
the battery. A full charge takes around 1.5
hours).
• When fully charged, unplug the charging cable from the power
socket.
Note:
The charging case will stop working when the battery is low.
1702/
3
