INSTALLATION
This section outlines the steps to install the LQD4500 SSD card into an expansion chassis.
Please verify these would be the correct installation steps? Is there anything missing?
Before handling any computer components, verify you are properly grounded. This
will prevent an electrostatic discharge, which can damage or destroy sensitive
computer components.
1.
Power off the expansion chassis and any peripheral devices.
2.
Unplug any cables that are connected.
3.
Remove the cover from the expansion chassis.
4.
Identify a full-height PCIe slot. Each PCI slot has a bay associated with it. Empty bays are covered by a
small metal protector.
5.
Remove the protector by unscrewing the screw(s) holding it in place and then lift it directly out of the
case. Save the removed screw(s).
6.
Remove the Liqid LQD4500 SSD card from the packaging and carefully inspect it for damage. Remove
the card from the anti-static bag by gripping it by the sides. Do not touch the contacts along the bottom,
and avoid touching any of the circuitry.
7.
Insert the card. Line up the contacts on the bottom of the PCI card with the PCI slot you plan to insert it
into. Press the card firmly straight down into the slot and ensure that the card is level and seated fully
in the slot.
Is there anything that needs to be mentioned about specifically which slot is selected?
If installing the card next to another card, use caution to prevent the cards from scraping
together to prevent components from coming off.
8.
Secure the card using the screw(s) that were removed from the metal bay cover.
9.
Put the expansion chassis cover back on.
10.
Plug all of the cables back in and power on the device.
LIQID ELEMENT LQD4500 HARDWARE GUIDE V 1.0
19
INSTALLATION
