Lippmann Geophysikalische Messgeräte 4point light, Operating Instructions Manual, Page: 116 / 130

Appendix
Page 116 of 130 Operating instructions 4point light 10W (V 4.58)
10.2.5 Monitoring
Dat Comment
S
Test data
1
0.123
99
3.5
0
1.000
0.000
1 12
1 20 1 21 40 1 51 75 0
1 2 4 3
2 3 5 4
3 4 6 5
4 5 7 6
...
E * Start
* comment
* frequency (
➔
Tab. 10.15)
* min. voltage [mV]
* max. number of averages [0…99]
* error limit [%]
* type of measurement (
➔
Tab.
10.15)
* electrode separation [m]
* profile position of first
electrode [m]
* first and last electrode used
* ActEle addresses used
* electrode configurations (A B M
N)
* electrode configurations
* electrode configurations
* electrode configurations
* end
MTab. 10.14: Monitoring parameter set
Code Frequency [Hz]
0 0.26
1 0.52
2 1.04
3 2.08
4 4.16
5 8.33
6 12.5
7 25.0
8 0.31
9 0.62
10 1.25
11 2.5
12 5.0
13 10.0
14 15.0
15 30.0
Monitoring
– frequency code
Code Type of
measurement
1 Schlumberger
2 Pole Dipole
3 Wenner
4 Dipole-Dipole
5 Pole-Pole
Monitoring
– type of measurement
Tab. 10.15: Monitoring
– frequency code and type of measurement
Parameter set