10
System Configuration
After successful activation of Wifi On-The-Go, use a mobile device or an
Ethernet cable and personal computer to connect to the 4G LTE wireless
hotspot.
NOTE:
For the best security, the settings should be configured with the
WiFi On-the-Go wired via Ethernet cable and a personal computer.
Connecting to Wifi On-The-Go
1.
From the device’s Wi-Fi settings, select Wifi On_the_Go_xxxx, (xxxx
means the numbers at the end will vary.) The password will be blank.
2.
To change the administrator password, rename the hotspot (ESSID)
and set the security settings with a login password:
A.
Open a web browser.
B.
Type 192.168.1.1 into the address bar.
C.
When prompted, enter the following default username and password
(Fig.5A)
and click Login
(Fig.5B)
.
I.
Username: root
II.
Password: admin
Summary of Contents for WIFI ON-THE-GO
Page 1: ...Quick Start Guide 4G LTE Wireless Hotspot CCD 0001336...
Page 7: ...7 Fig 2 A Activation Using AT T or T Mobile SIM Card...
Page 18: ...18 Notes...
Page 19: ...19 Notes...
