3
lippert.com
432-LIPPERT (432-547-7378)
Rev: 09.26.22
True Course
™
Electronic
Sway Control System
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004358
Installation
1.
Hold the control module against the roadside trailer
frame and mark the locations for four pilot holes
(Fig.1)
.
NOTE:
Before positioning the module for marks, make
sure there is adequate length on the attached front 7-way
cord to connect to the tow vehicle.
NOTE:
Place the module so it is level to the top of the
frame where it is to be installed.
module level with
top of frame
1/8
” pilot hole
1/8
” pilot hole
7-way connector
from trailer
7-way cord to
tow vehicle
1/8
” pilot hole
1/8
” pilot hole
Fig.1
2.
Using a
1/8
” bit, drill pilot holes for the four
1/4
” self-drilling
screws
(Fig.1)
.
3.
Install screws to secure the module to the frame
(Fig.1)
.
4.
Connect the attached 7-way cord to the tow vehicle.
5.
Attach the trailer’s 7-way connector to the back of the
control module.