4
lci1.com
574-537-8900
Rev:05.11.21
CCD-0003934
Power Pro Max
™
(Portable Power Cleaner)
Installation and Owner’s Manual
(For Aftermarket Applications)
Fig.3
3.
To only use the 360-degree nozzle
(Fig.4A)
:
A.
Press and hold the lock button
(Fig.4B)
located on the top
of the handle assembly
(Fig.4C)
while inserting the nozzle.
B.
Release the lock button when the nozzle seats into
the handle assembly.
4.
To use the nozzle extension
(Fig.5A)
with the
360-degree nozzle:
A.
Press and hold the lock button
(Fig.5B)
located on the
top of the handle assembly
(Fig.5C)
while inserting the
nozzle extension.
B.
Release the lock button when the extension seats into
the handle assembly.
C.
Press and hold the lock button located at the end of
the extension
(Fig.6A)
while inserting the 360-degree
nozzle
(Fig.6B)
.
D.
Release the lock button when the nozzle seats into
the extension.
Water Supply Line
Make sure the water supply line particle filter is attached
and free of debris.
1.
Unscrew clear plastic filter end cap
(Fig.7A)
from the
water supply line.
2.
Inspect filter for debris. If necessary, remove filter
and clean.
3.
Reinsert filter, then reattach filter end cap to water
supply line.
4.
Connect the water supply line
(Fig.8A)
to the handle
assembly
(Fig.8B)
by inserting the quick disconnect
fitting
(Fig.8C)
over the water inlet nipple
(Fig.8D)
until it
seats
(Fig.9A)
.
B
A
Fig.4
A
B
C
B
A
C
Fig.5
B
A
Fig.6
C
D
A
B
Fig.7
