Rev: 06.30.22
Page 12
CCD-0001575
4.
Remove the screws (Fig. 19A) securing the tab bracket (Fig. 19B) to travel block (Fig. 19C), then flip the
tab bracket 180 degrees.
C
A
A
B
Fig. 19
5.
Re-attach the tab to the travel block.
6.
Repeat for the other tab brackets.
7.
Place the bunk platform on the trolley tabs.
8.
Secure the bunk platform to the trolley tabs with the clevis pins and cotter (hair) pins.
9.
Reattach bunk hardware pins.
Lower Trolley Sofa/Dinette Bracket Removal
Resources Required
• Phillips head screwdriver
The sofa/dinette brackets can be removed from the lower trolleys and trolley tabs can be added to
accommodate a second bed platform. See Lower Bunk Trolley Tab Installation for instructions on adding
trolley tabs.
1.
Remove the sofa/dinette configuration or bed platform from the support brackets.
2.
Remove the stop screw (Fig. 20A) securing the support bracket, then remove the screw (Fig 20B)
securing the upper bunk lock mechanism bracket (Fig. 20C) and remove the bracket.
3.
Grasp the base of the sofa bracket (Fig. 21A) and pull up until the hooks are even with travel trolley
slots (Fig. 21B), then pull the sofa bracket away from the travel trolley.
4.
Repeat for other brackets.
Fig. 20
B
B
Fig. 21
A
A
B
C
