4
432-LIPPERT (432-547-7378)
Rev: 07.12.22
Thin Shade
For Lippert RV Entry Door
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0001507
Fig.4
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
9.
Remove the top 8 Phillips head screws
(Fig.4A)
from the
interior window frame. Do not discard screws.
10.
Gently pull back the top of the frame.
11.
If currently equipped, remove the existing window
shade from inside of the interior window frame.
12.
Holding the top rail at an approximate 45 degree angle,
insert one end into the corner between the inner frame and
glass
(Fig.4)
.
13.
Repeat this action on the opposite end of the top rail.
14.
Press both ends up until the part is securely in place.
15.
Top rail must be seated above tabs
(Fig.5A)
16.
Press top of frame back into position and replace
Phillips head screws removed in step 9.
17.
Remove the bottom 8 Phillips head screws
(Fig.4B)
from
the interior window frame. Do not discard screws.
Fig.5
A
B
tabs
tabs
top rail
bottom rail
18.
Holding the bottom rail at an approximate 45 degree
angle, insert one end into the corner between the inner
frame and glass
(Fig.4)
.
19.
Repeat this action on the opposite end of the bottom
rail.
20.
Press both ends down until the part is securely in
place.
21.
Bottom rail must be seated below tabs
(Fig.5B)
22.
Press bottom of frame back into position and replace
Phillips head screws removed in step 16.
Manual information may be distributed as a complete
document only, unless Lippert provides explicit consent
to distribute individual parts.
All manual information is subject to change without
notice. Revised editions will be available for free
download at
. Manual information is
considered factual until made obsolete by a revised
version.
Please recycle all obsolete materials and contact
Lippert with concerns or questions.
