background image

2

lippert.com 

    432-LIPPERT (432-547-7378)    

 

Rev: 10.13.21

Screen Assist

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004313

XX

"

Fig.1 

Fig.2 

doorjamb

 A

measure

here

THE “CAUTION” SYMBOL ABOVE IS A SIGN THAT A 

PROCEDURE HAS A SAFETY RISK INVOLVED AND 

MAY CAUSE PERSONAL INJURY, PRODUCT AND/OR 

PROPERTY DAMAGE IF NOT PERFORMED SAFELY 

AND WITHIN THE PARAMETERS SET FORTH IN THIS 

MANUAL.

THE “WARNING” SYMBOL ABOVE IS A SIGN THAT 

AN INSTALLATION PROCEDURE HAS A SAFETY 

RISK INVOLVED AND MAY CAUSE DEATH, SERIOUS 

PERSONAL INJURY, SEVERE PRODUCT AND/OR 

PROPERTY DAMAGE IF NOT PERFORMED SAFELY 

AND WITHIN THE PARAMETERS SET FORTH IN THIS 

MANUAL.

FAILURE TO FOLLOW INSTRUCTIONS PROVIDED 

IN THIS MANUAL MAY RESULT IN DEATH, SERIOUS 

PERSONAL INJURY AND/OR SEVERE PRODUCT AND 

PROPERTY DAMAGE, INCLUDING VOIDING OF THE 

COMPONENT WARRANTY.

ALWAYS WEAR EYE PROTECTION WHEN 

PERFORMING SERVICE, MAINTENANCE OR 

INSTALLATION PROCEDURES. OTHER SAFETY 

EQUIPMENT TO CONSIDER WOULD BE HEARING 

PROTECTION, GLOVES AND POSSIBLY A FULL FACE 

SHIELD, DEPENDING ON THE NATURE OF THE TASK.

Safety

Read and fully understand all instructions before installing or 

operating this product. Adhere to all safety labels. 

This manual provides general instructions. Many variables 

can change the circumstances of the instructions, i.e., the 

degree of difficulty, operation and ability of the individual 

performing the instructions. This manual cannot begin to plot 

out instructions for every possibility, but provides the general 

instructions, as necessary, for effectively interfacing with the 

device, product or system. 

Door Size

To verify the proper size of the Screen Assist required, just 

above the threshold 

(Fig.2A)

, at the front of the entry door 

opening (NOT the screen door), measure from doorjamb to 

doorjamb 

(Fig.2)

. Round up approximately 

5/8

” to determine the 

rough opening (RO) door size. The Screen Assist will only fit 

doors with rough openings between 26 and 30 inches. 

Purchase Verification

Handle Style

The Screen Assist will only function as a lever handle push bar 

if installed on screen doors with the handle style in 

(Fig.1)

. The 

Screen Assist will work as a fixed push bar on screen doors 

with any handle style. See Mounting Options section. 

Summary of Contents for 2021000090













Reviews: