Rev: 05.23.22
Page 4
CCD-0006230
Using the Flex Wall Switch
NOTE:
Replacement battery for the Flex Wall Switch is one A23 battery.
1.
Make sure the ignition key to the unit is not in the ignition. The Challenger door will not open or close
unless the key to the unit is removed from the ignition.
2.
Make sure people and objects are clear of the door opening.
3.
Press the unlock button (Fig. 2A) on the switch to open the door.
4.
Press the lock button (Fig. 2B) on the switch to close the door.
Using the Remote Key Fob
NOTE:
Replacement battery for the Remote Key Fob is one L1028F battery.
1.
Make sure the ignition key to the unit is not in the ignition. The Challenger door will not open or close
unless the key to the unit is removed from the ignition.
2.
Make sure people and objects are clear of the door opening.
3.
Press the unlock button (Fig. 3B) on the remote to open the door.
4.
Press the lock button (Fig. 3A) on the remote to close the door.
Fig. 2
A
B
Fig. 3
A
B
Do NOT leave the key in the ignition when operating the door. Leaving the key in the ignition while
opening or closing the door can cause personal injury and/or product or property damage. Remove
the key from the ignition before opening or closing the door.
Do NOT operate the door until the bypass valve is cleared of air. Opening or closing the door while
the bypass valve is NOT cleared of air can cause personal injury and/or product or property damage.
Purge the bypass valve before opening or closing the door.
