Rev: 04.13.21
Page 2
CCD-0002733
TABLE OF CONTENTS
The "WARNING" symbol above is a sign that an installation procedure has a safety risk involved
and may cause death, serious personal injury and/or severe product or property damage if not
performed safely and within the parameters set forth in this manual.
Always wear eye protection when performing service, maintenance or installation procedures. Other
safety equipment to consider would be hearing protection, gloves and possibly a full face shield,
depending on the nature of the task.
The "CAUTION" symbol above is a sign that an installation procedure has a safety risk involved and
may cause personal injury and/or product or property damage if not performed safely and within the
parameters set forth in this manual.
Resources Required
• Cordless or electric drill or screw gun
• Appropriate drive bits
• Two #8 self-tapping pan head screws
• Wire strippers
• Appropriate electrical connectors
Introduction
This document covers the installation of the Tire Linc Tire Pressure and Temperature Mounting System
(TPMS) repeater dock with additional instructions of a complete TPMS is provided by the OEM.
Images used in this document are for reference only when assembling, installing and/or operating this
product. Actual appearance of provided and/or purchased parts and assemblies may differ.
For information on the assembly or individual components of this product, please visit:
Safety
This manual provides general instructions. Many variables can change the circumstances of the instructions,
i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This
manual cannot begin to plot out instructions for every possibility, but provides the general instructions,
as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the
provided instructions may result in death, serious personal injury, severe product and/or property damage,
including voiding of the LCI limited warranty.
