background image

Rev: 02.25.21

Page 2

CCD-0004124

TABLE OF CONTENTS

System Information

 

2

Safety

 

2

Operation

 

3

Release Steps 

3

Leg Extension Adjustment 

4

Secure Steps 

4

Notes

 

5

Safety

Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions, 

i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This 

manual cannot begin to plot out instructions for every possibility, but provides the general instructions, 

as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the 

provided instructions may result in death, serious personal injury, severe product and/or property damage, 

including voiding of the LCI limited warranty.

System Information

The SolidStep® XF is a trailer entry step assembly that can be mounted to the side of any trailer, providing  

an ease of entry, regardless of level ground. Step identification tags are located under one of the step 

extrusions, typically the top full step.
Additional information about this product can be obtained from lci1.com/support or by downloading 

the free myLCI app. The app is available on iTunes® for iPhone® and iPad® and also on Google Play™ for 

Android™ users.
iTunes®, iPhone®, and iPad® are registered trademarks of Apple Inc.

Google Play™ and Android™ are trademarks of Google Inc.
For information on the assembly or individual components of this product, please visit: 

https://support.lci1.com/steps-support-solidstep

.

Note:  

Images used in this document are for reference only when assembling, installing and/or operating 

this product. Actual appearance of provided and/or purchased parts and assemblies may differ.

No repairs should be attempted by anyone other than a qualified professional. The deployment 

and retraction of the step assembly can cause injury if proper precautions are not taken. The step 

assembly was designed for an operational weight rating of 400 lbs.

Failure to follow the instructions provided in this manual may result in death, serious personal 

injury, product or property damage or voiding of the component warranty.

Summary of Contents for SolidStep XF







Reviews: