Lippert Components In-Wall Slide-Out Winnebago, Repair Manual, Page: 2 / 16

Rev: 08.07.18
Page 2
CCD-0001772
TABLE OF CONTENTS
Safety Information 2
Introduction 2
Preliminary Visual Inspection 3
Assembly Removal Procedure 4
Tools Required
4
Procedure 4
Replacement of Entire Assembly Required 6
In-Wall
®
Gear Racks 7
Inspection
7
Replacement
7
Shoe 8
Inspection
8
Replacement 8
V-Roller 9
Inspection
9
Replacement 9
Bearing Block/Spur Gear 10
Inspection 10
Replacement
10
Re-Timing Procedure 11
Assembly Installation Procedure 12
Synchronizing the Slide-Out Motors
13
Repair Packages Part Numbers 14
Standard (W/ Winnebago Notch)
14
Bearing Block Repair Package - 379060
14
Notes 15
Introduction
This document will aid in determining whether it is necessary for the assembly to be repaired or replaced entirely.
Safety Information
Failure to act in accordance with the following may result in death, serious injury,
coach or property damage.
The In-Wall® Slide-Out System is intended for the sole purpose of extending and retracting the slide-out room. Its
function should not be used for any purpose or reason other than to actuate the slide-out room. To use the system
for any reason other than what it is designed for may result in death, serious injury or damage to the coach.
Before actuating the system, please keep these things in mind:
1. The unit should be parked on solid and level ground and the area around the unit clear of obstructions
that may cause damage when the slide-out room is being repaired.
2.
Be sure all persons are clear of the coach prior to the slide-out room maintenance.
3. Keep hands and other body parts away from slide-out mechanisms during actuation.