Lippert Components 799870 Installation And Owner'S Manual Download Page 2

2

lci1.com      

 

574-537-8900    

 

Rev: 03.02.21

Ground Control

®

 TT 

Leveling OneControl

® 

Touch Panel 

(3K-5K)

 

 

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0002700

Introduction

With the push of a button, the Ground Control TT 

Leveling System levels and stabilizes a trailer quickly and 

accurately, enhancing the overall camping experience. The 

Ground Control TT Leveling System saves the owner time 

by leveling and stabilizing the trailer in a matter of minutes. 
Features:
• Saves time setting up the trailer at the campsite
• Both fast and accurate automatic electronic leveling
• Includes an automatic hitch recognition function

NOTE: 

Images used in this document are for reference 

only when assembling, installing and/or operating this 

product. Actual appearance of provided and/or purchased 

parts and assemblies my differ.
Additional information about this product can be obtained 

fro

lci1.com/support

 or by using the myLCI app. 

Replacement kits can be ordered from 

https://store.lci1.

com/

 or by using the myLCI app.

The myLCI app is available for free on iTunes

®

 for iPhone

®

 

and iPad

®

 and also on Google Play

 for Android

 users.

iTunes

®

, iPhone

®

, and iPad

®

 are registered trademarks of 

Apple Inc.
Google Play

 and Android

 are trademarks of Google Inc.

Safety

Read and understand all instructions before installing  

or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables 

can change the circumstances of the instructions, i.e., the 

degree of difficulty, operation and ability of the individual 

performing the instructions. This manual cannot begin 

to plot out instructions for every possibility, but provides 

the general instructions, as necessary, for effectively 

interfacing with the device, product or system.  

Failure to correctly follow the provided instructions may 

result in death, serious personal injury, severe product  

and/or property damage, including voiding of the  

LCI limited warranty.

Trailer Weight Rating

Ground Control Travel Trailer Leveling System   

has a maximum Gross Vehicle Weight Rating (GVWR)  

of 10,000 lbs.  

THE “WARNING” SYMBOL ABOVE IS A SIGN THAT 

A PROCEDURE HAS A SAFETY RISK INVOLVED 

AND MAY CAUSE DEATH OR SERIOUS PERSONAL 

INJURY IF NOT PERFORMED SAFELY AND WITHIN 

THE PARAMETERS SET FORTH IN THIS MANUAL. 

FAILURE TO FOLLOW INSTRUCTIONS PROVIDED 

IN THIS MANUAL MAY RESULT IN DEATH, SERIOUS 

PERSONAL INJURY AND/OR SEVERE PRODUCT AND 

PROPERTY DAMAGE, INCLUDING VOIDING OF THE 

COMPONENT WARRANTY.

TRAILER MUST BE SUPPORTED PER MANUFACTURER’S 

RECOMMENDATIONS BEFORE WORKING 

UNDERNEATH. FAILURE TO DO SO MAY RESULT  

IN DEATH OR SERIOUS PERSONAL INJURY.

Summary of Contents for 799870





































Reviews: