9
lci1.com
574-537-8900
Rev: 08.20.20
CCD-0003866
Flow Max
™
40V Portable Power Cleaner
Installation and Owner’s Manual
(For Aftermarket Applications)
What is happening?
What is happening?
Why?
Why?
What should be done?
What should be done?
Washer does not
turn on.
Discharged battery.
Remove and recharge battery. Reinstall fully charged battery into
handle assembly.
Battery not engaged.
Remove and reinsert battery into handle assembly.
Lower than expected
water pressure.
Clogged water filter.
Remove, inspect, clean and reinstall water filter.
Blocked water supply line.
Remove, inspect, clean and reinstall water supply line.
Loose water supply line.
Disconnect and reinstall water supply line into handle assembly.
Water supply low or empty.
Replenish water supply.
Little or no additive
dispenses when set to
Foam mode.
Loose additive
bottle connection.
Remove and reinstall additive bottle.
Empty additive bottle.
Remove additive bottle, replenish additive, then reinstall bottle.
Additive bottle leaks.
Loosely connected bottle.
Remove additive bottle, then carefully reconnect bottle onto
the nozzle.
No spray dispenses
when set to a water
mode or Foam mode.
Clogged nozzle, nozzle
extension or both.
If applicable, remove additive bottle from nozzle. Disconnect
nozzle from nozzle extension or handle assembly. If used,
disconnect nozzle extension from handle assembly. Inspect
nozzle, and nozzle extension if used, for obstructions. Clear any
obstructions, then reinstall nozzle, and nozzle extension if used. If
applicable, reinstall additive bottle.
