![background image](http://html1.mh-extra.com/html/lipco/uf-100/uf-100_translation-of-original-instructions_1927002013.webp)
Instructions
Reversing Harrow UF 70/80/90/100 _ 70L
13 - 28
110030-11-EN BA UF 70_80_90_100 UF 70 L / 29.06.2020
10. Connection to the engine-driven machine
Note
:
In standard version, reversing harrow is equipped with rotation
gear.
As UF 70 reversing harrow is also available with an anti-clockwise
gear (version UF 70 L), make sure, when attaching reversing harrow
to the engine-driven machine, that both directions of rotation are
identical.
The direction of rotation of the reversing harrow must correspond to
the direction of rotation of the engine-driven machine, otherwise
malfunctions / damages will occur.
•
Before attaching the machine-flange (Fig. 6) corresponding to the
type of engine-driven machine you have, it is recommended
spreading grease on the outer diameter of the machine hub (Fig.
6, Ref. B). Then insert the flange with its two threaded pins (Fig. 6,
Ref. C) and the two lock nuts. To attach the flange to the hub,
proceed as follows:
Fig. 6
•
Screw the threaded pins in as far as possible and then unscrew
them by one turn. Tighten the lock nuts. After this operation, make
sure that the flange oscillates freely without squeezing or blocking.
•
After having greased the connecting shaft (Fig. 4, Ref. D), insert it
on the machine shaft of the Reversing Harrow. When these steps
are complete, move the engine-driven machine close to the unit.
Ensure that the gearing of the connecting shaft engages correctly
A
B
C
E
D
Summary of Contents for UF 100
Page 28: ...28 28 Design mail bauer ib com...