Instructions
Sowing Machine SMD 100/110/120/140..MA
16 - 20
100900-03-EN BA SMD 100_110_120_140 MA / 24.01.2020
15. After use
•
If the
LIPCO Sowing Machine
is to remain unused for a longer
period, it is necessary to carry out the following steps:
•
Thoroughly wash and dry the
LIPCO Sowing Machine
!
•
Thoroughly check the function of the moving parts, replace any
damaged, worn or deteriorated parts!
•
Check all screws for tight seat!
•
Clean and oil the Bowden cable!
•
Oil all unpainted metal parts to protect them against corrosion!
•
Oil dosage slide and chain, lubricate roller support; and then cover
the
LIPCO Sowing Machine
and store it in a dry place so that it
will be ready for use any time.
•
Attention!
Before using the unit again, follow the instructions in chapter "14.
Maintenance".
Summary of Contents for SMD 100 MA
Page 20: ...20 20 Design mail bauer ib com...