Operating instructions
Rotating Pathway Grader RWD 130/150
17 - 26
04.11.2004 / 01
9. Connecting the universal joint shaft
•
Only use universal joint shafts in perfect condition and with
overload protection!
•
When the unit has been coupled to the tractor, check the exact
length of the universal joint shaft.
•
Very important:
Highest possible overlapping has to be aimed at. During
operation, the maximum extension of the joint shaft should be
half the sliding profile overlapping (Fig. 2). When connecting to
different tractors, the length has to be checked again!
•
Press sliding pin and push the joint shaft
onto the power takeoff shaft until the
sliding pin engages! (Fig. 3)
•
This tractor symbol indicates the tractor
side of the joint shaft. Always attach the
overload protection on machine side!
•
Attach the holding chain of the joint
shaft in order to avoid a rotation of the
joint shaft protection.
Fig. 3
Fig. 2