Lionelo Thermup, User Manual

Page: 7 / 60

‑ 7 ‑ EN
List of parts (fig. A)
Defrosting
1.
Place a bottle or container with food in the warmer (fig. 1).
2.
Pour water into the warmer until you reach food or milk level. In case of a large
amount of food or milk, the maximum amount of water in the warmer is about 1,5
cm below the upper edge of the device (fig. 2).
3.
Choose defrost/quick heat in the display (fig. 3). Wait for the status LED to glow.
NOTE
Due to high diversity of baby food consistency, it is advisable to frequently stir and
inspect the temperature of food defrosted.
Do not serve milk/food shortly after defrosting.
Quick heating
1.
Place a bottle or container with food in the warmer (fig. 1).
2.
Pour 40 ml of water into the warmer (see: table below) (fig. 2).
3.
Select defrost/quick heat in the display (fig. 3). Wait for the status LED to glow.
4.
Do not heat frozen milk or food. Remember to heat milk or food after defrosting.
NOTE
In case of quick heating, use the device together with a cover.
Bottle Initial temp. Amount of
water
Amount of milk
60ml/2oz 120ml/4oz 180ml/6oz 240ml/8oz
Glass 4 ° C/41 ° F
40ml/1.4oz
3 min 4 min 5 min 6 min
20 ° C/68 ° F 2,5 min 3 min 4 min 4,5 min
Plastic 4 ° C/41 ° F 4 min 5,5 min 6 min 7 min
20 ° C/68 ° F 3 min 3,5 min 4,5 min 5 min
Milk heating
1.
Place a bottle with milk or water in the warmer (fig. 4).
2.
Pour water into the warmer until you reach milk or water level in the bottle. In case
of a large amount of water or milk, the maximum amount of water in the warmer
1.
Cover
2.
Bottle/container holder
3.
Warmer
4.
Status LED
5.
Defrost/quick heat
6.
Milk heating
7.
On/off switch
8.
Value up
9.
Food heating
10.
Disinfect
11.
Change mode
12.
Value down