Lionelo Ruben, User Manual

Page: 8 / 92

‑ 8 ‑ EN
2. Assembly instructions
Warning: This item can only be installed by adults
1. Open the support tube towards the two sides of the main model and
assist model (by pressing down the buttons and at the same time pulling
both sides of the support tube outwards) (fig. 1).
a. Press the buttons
b. Unfold the supports according to the arrows
2. As shown in the pictures below, insert the front and back leg tube
into the support tubes of main model and assist model, and make sure
the shrapnel inside the tube pops well (fig 2).
3. Assemble the seat frame, plum blossom button, cap button and davit
cover to the shaft of the main model and assist model, as shown in the
pictures below. Then try to pull out the davit of the seat frame in order
to make sure the installation is correct (fig 3).
1. Davit arm
2. Plum blossom button
3. Cap button
4. Davit cover
4. As shown in the picture below, insert the ends of the toy bar into the
square holes on the left and right davit arm (fig. 4).
5 .Install the mosquito net on the seat according to the following pictures (fig. 5).
6. Fix the shoulder tape as shown in the pictures below (fig. 6).
a. Top
b. Bottom
c. Draw the tape out from the top Then, draw it through the bottom. Fasten the tape
Adjust the length of the shoulder and waist belt as in the following picture (fig. 7)