EN
•
Do not use the safety seat without the original pad. Do not
replace the cover / pad with the one that is not recommend
-
ed by the manufacturer. It is an integral part of the product
and it contributes to the safety of the child.
•
The seat can be installed in vehicles approved by the
ONZ/EKG (Regulation No 16) or other relevant regulations.
•
Rigid items and plastic parts of a child restraint must be located
and installed in such a way so that, under normal operating condi
-
tions of the vehicle, they cannot be trapped or jammed by a sliding
seat, a door, etc.
•
During stopovers, ensure that the child does not come out
of the safety seat unsupervised. Always lock the vehicle’s
doors.
•
Do not use the safety seat if any of its parts is damaged.
•
When fastening the safety belts or harness always follow
the instructions specified by the manufacturer. All the belts
securing the safety seat to the vehicle should be tight. The
safety harness must be adjusted to the physique of the
child, and not twisted. Do not use any fixing points other
than those described in the manual and marked on the
safety seat.
•
Make sure all the lap straps are run low enough, in order to
support the pelvis.
•
Luggage or any other items should be secured so as not to
cause damage to the child.
•
The safety seat should be replaced if it has been subjected
to violent forces during an accident.
•
Do not install the safety seat in a way other than the one described
in the manual.
