Lionelo MILAN PLUS, User Manual

Page: 32 / 56

•
Place the rear base in the tube
holes (from the bottom).
•
Align the rear base lining with
the rear legs.
•
Press the buttons on the rear
legs. Keep aligning the rear
base tubes with the rear legs
until you hear each of them
clicks.
•
Pull the rear base to make sure
it is properly locked in place. If
you can move the rear base, it
means the construction has
been assembled the wrong
way and you have to reassem -
ble it. In that case, remove the
rear base and repeat the steps
from the point no. 7.
•
Place the assembled swing in
the vertical position.
•
Make sure that the front and
rear base stand flat on the
floor.
•
If one of the bases (or both)
doesn’t, it means the prod -
uct has been assembled the
wrong way. In that case, disas -
semble it and repeat the steps
from the points no.1-7.
Rear
base
Rear leg
The buttons
are underneath
Rear base
Front base
CORRECT
INCORRECT
7
8
EN