4.3. Installing back wheels:
•
Place bearing shims on each side of the axle.
•
Align the stroller frame mounting brackets on each side of the axle.
•
Before putting on wheels connect the two frame brackets with the foot brake
bar.
•
Place the buttons on each side of the axle and put on the wheels.
•
Lock the wheels with special locking buttons.
•
Install the wheels’ covers (Figure 3).
•
Attach the assembled axle to the stroller frame in a way so that the brake
faces the outside of the stroller (Figure 4).
4.4. Installing the front panel and the back tray:
•
To install the panel slide the plastic connectors into the openings on the sides
of the stroller (Figure 5). The proper installation should be confirmed by a
“click” sound. To remove the panel, press the two tabs at the bottom toward
the inside of the stroller, and without releasing them, pull out the panel.
•
To mount the back storage tray, put it on the stroller’s handle so that it is
locked on both sides by the locks passing through the holes on the sides of
the tray (Figure 6).
