Lionelo Linn, User Manual

Page: 8 / 19

Note: To ensure the safety of your baby, please check the
followings:
1. The shoulder safety belt and your baby shoulder should be at a same
height or a little lower is allowable. The belt should be close to your baby
body, but it should not tie your baby body.
2. Do not enwind or exchange the position of the shoulder safety belt
3. The waist safety belt should be set at the lowest position of your baby’s
hip.
4. Adjust the shoulder safety belt properly
5. A “click” can be heard when the male buckle and female buckle engage
6. When the safety belt is out of order, please call the professional
maintenance personnel from the sale company for repairing.
While your baby is in the feeding chair, be sure to use safety belt all
the time.
Folding button
Fig.23 Fig.24
As shown in Fig. 9, press down the reverse handle of the tray downwards,
pull to the end and then pull out the tray. As shown in Fig. 23, hold the pull
ring part on both side joint, push the folding button to the end with your
forefinger, forwards move the rear leg to the end at the same time, then
loosen your hand, a “click” can be heard, the folding button ejects out,
now the feeding chair is in its folding state, buckle the reverse hook hole
(see Fig. 24) of the tray onto the hook on the decorative sleeve of the
rear leg, please refer to Fig. 24. (Note: When the feeding chair is in its
standing position, the chair seat should be at its lowest position and the