Lionelo DAN, User Manual

Page: 3 / 8

Maintenance:
Oil the moving parts only when it is necessary using silicone-based grease. Check
tightness of bolts and other parts periodically. Replace or repair the parts of the bike
only when it is needed. Always use recommended spare parts only. In order to avoid
friction that can lead to incorrect operation of a bicycle, make sure that all plastic
moving parts along the metal frame are clean of dust, dirt and sand. The bike should
be stored in a dry place. Prolonged exposure to direct sunlight can cause
deformation of plastic parts.
Montage:
Installation and adjustment of the front fork and handlebar:
Insert the front fork into the main frame. Slide the stem of the handlebar into the main
frame. Adjust the clamp, but do not tighten it yet. Turn the handlebar so that it is
perpendicular to the front wheel. NOTE! MAKE SURE the MINIMUM mark on the
handlebar is below the upper part of the clamp. Tighten the clamp until the front
wheel and strap clasp are properly secured (not moving). Put the cover on the
clamp.
Saddle installation / adjustment:
Slide the saddle into the seat tube. NOTE! MAKE SURE the MINIMUM mark on the
tube is below the upper part of the clamp. Tighten the clamp until the saddle is
properly secured (not moving).
Handlebar
Clamp cover
Clamp
Main frame
Front fork
Saddle
Clamp
Seat tube
Assembled bike