Lionelo Babyline 2.1, User Manual, Page: 6 / 16

EN
When power of parent unit is supplied by batteries, it turns red while battery voltage is below 3.3V.
Only if the sound exceeds 50dB, the baby unit can start operation and transmit sound.
Automatic squelch function to prevent parent from interference noise.
Both Parent unit and baby unit are with charge function.
Charge indication:
Charging under ON status: the power light is red and green.
Charging under OFF status: the power light is red.
This product is intended as an support. It is not a substitute for responsible and proper adult supervision
and not intended for use as a medical monitor.
Please do not use other power adapters which may not fit this product configuration.
Please do not expose the baby monitor to extreme cold, heat, wet or direct sunlight.
Make sure the baby unit and the adapter cord are always out of reach of the baby at least 1 meter
to avoid a possible strangulation hazard.
Never cover the baby unit nor parent unit with anything such as towel or blanket.
While cleaning the devices make sure it is in OFF mode.
Problem Possible cause Solution
Power indicator
light not working
• Not switched on
• Power not getting to the unit
• Low batteries
• Turn on the unit
• Make sure the units are
connected to the power supply
• Replace the batteries
Power light
flashing
• Not connected well
• Batteries low
• Make sure connection is well
Parent unit
makes loud
noises
• Units are too close together
• Volume on parent unit may be too high
• Move parent unit away from
baby unit
• Lower the volume
Weak sound or
mute coming
from parent unit
• Volume on parent
• unit is set too low or muted
• Increase the volume
No connection
between units
• Units may be too far from each other
• Units are set to different channels
• Move parent unit closer to baby unit
• Set channel the same on both units
Pictures are for reference only. The real design of products may differ from pictures presented.