Accessory Switch Controller wiring and operation
Three wires (not included) are needed to connect your Pylon to the Accessory Switch
Controller (ASC) and a separate accessory transformer.
1. Attach one wire to the transformer Power/A terminal and connect it to the
COMM terminal on the ASC.
2. Connect one of the Pylon terminals to a numbered accessory terminal on
the ASC.
3. Finally, connect the remaining Pylon terminal to the transformer
Common/Ground/U terminal.
Use the AUX2 button on your CAB-1 Remote Controller to toggle the Pylon ON and OFF.
Operating your WWII Airplane Pylon with TrainMaster Command
Control (continued)
6
Common/Ground/U
Power/A
Py
lo
n
POWER
SUPPLY
Figure 3 ASC connections
