Lionel Summer Vacation, Owner'S Manual, Page: 6 / 8

Controlling the accessory in the Command Control environment
(continued)
Accessory Switch Controller wiring and operation
F our wires are needed to connect the accessory to the Accessory Switch Controller (ASC) and a
separate accessory transformer. Refer to Figure 3.
1. Connect the accessory to the power supply as discussed on page 3.
2. Attach one wire to a PRESS SWITCH terminal and connect it to the COMM terminal on the
ASC.
3. Attach another wire to the remaining PRESS SWITCH terminal and connect it to a
numbered accessory terminal on the ASC.
Use the AUX2 button on your CAB-1 Remote Controller to toggle the fire ON and OFF.
6
A
U
Figure 3. ASC connections
Bottom of the
accessory