Lionel Husky Stack, Owner'S Manual

Page: 2 / 4

C ongratulations on your purchase of the Lionel Husky Stack
®
! Each car features two
removable intermodal containers and rotating bearing caps on the trucks.
This car was designed to operate on track with a minimum curve of O-36. Be sure
that your car clears all objects around your layout. Move switch stands to the outside
of the loop as needed for additional clearance.
Placing the intermodal containers on the car
Y our Husky Stack was designed to transport two intermodal containers. Before placing the
containers on the car, close the doors on the containers.
Place the first container on the car and position the second on top so that the posts are
inserted into the holes at each corner. Refer to Figure 1.
Be sure that your Husky Stack clears all structures next to and above the track.
Close the doors before placing the containers on the car.
2
Figure 1. Stacking the containers on the car
Caution!
Caution!
Note!
Post
Hole
The following Lionel marks may be used throughout this instruction manual and are protected under law.
All rights reserved.
Lionel ® , TrainMaster ® , Odyssey ® , RailSounds ® , CrewTalk ™ , TowerCom ™ , DynaChuff ™ ,
StationSounds ™ , Pullmor ® , ElectroCoupler ™ , Magne-Traction ® , CAB-1 ® Remote Controller,
PowerMaster ® , Lionel ZW ® , ZW ® , PowerHouse ® , TMCC ® , Lionelville ™ , Lockon ® , Wireless Tether ™ ,
LionMaster ® , FatBoy ™ , American Flyer ® , TrainSounds ™
The name FasTrack
®
is used with permission from Pitsco, Inc.