Replacing your FT’s lamps
Y
our FT is illuminated by one 18-
volt lamp. During the course of
normal operation, they may require
replacement.
Begin by removing the FT’s shell;
see page 7 for screw location. After
removing the six screws, carefully lift
the shell away from the frame. Take
care with the various wiring assemblies
connected to the shell.
Locate the assembly containing the
expired lamp. It’s held in position by a
plastic housing; carefully remove the
expired lamp from the socket. Replace it
with Lionel part no. 12-3011-311, avail-
able from your authorized Lionel Service
Center or Lionel Service. See the Lionel
Service section on page 20 for more
information. Reinstall the shell.
Remove the FT’s shell, pull the lamp
assembly from its retaining clip, and
replace the expired lamp.
Note!
If you have upgraded your powered locomotive to Command
Control, make sure the headlight was not turned off by press-
ing AUX2 before replacing bulb.
8
8
Lionel part No.
12-3011-311
