Transformer/Power supply
Y
ou may also use a transformer or a separate accessory power supply to power your Yard
Lights. Simply connect one wire to the Power/A terminal and the other wire to the
Common/Ground/U terminal on the power supply.
Installing your Yard Lights in a TrainMaster Command Control
environment
F
or TrainMaster Command Control operation, wire your lights with an SC-2 Switch and
Accessory Controller (available separately, 6-22980) or the Accessory Switch Controller
(available separately, 6-14182). Refer to these manuals for additional information.
We recommend using 22-gauge wire.
SC-2 wiring and operation
T
hree wires (not included) are needed to connect your Yard Lights to the SC-2 and a
separate accessory transformer.
1. Attach one wire to the Common/Ground/U terminal of the transformer and connect it to
the accessory COMM (common) position on the SC-2.
2. Attach one of the light/extension wires (for wiring the lamps together, refer to the next
section) to the accessory ON/OFF toggle position on the SC-2.
3. Finally, connect the remaining lamp/extension wire to the Power/A terminal on the
transformer.
Use the
AUX2
button on your CAB-1 Remote Controller to toggle the lights on and off.
Accessory Switch Controller wiring and operation
T
hree wires (not included) are needed to connect your Yard Lights to the Accessory Switch
Controller (ASC) and a separate accessory transformer.
1. Attach one wire to the Power/A terminal of the transformer and connect it to the COMM
terminal on the ASC.
2. Attach one of the light/extension wires (for wiring the lamps together, refer to the next
section) to the a numbered accessory terminal on the ASC.
3. Finally, connect the remaining lamp/extension wire to the Common/Ground/U terminal
on the transformer.
Use the
AUX2
button on your CAB-1 Remote Controller to toggle the lights on and off.
2
Note!
