TrainMaster Command Control operations
CAB-1 Remote Controller commands
T
he CAB-1 Remote Controller commands are detailed below.
The corresponding
RailSounds sound system effects are in bold italic type.
Releases the front coupler when you have addressed a
single unit. Releases the front coupler of the lead unit
when you have addressed a lash-up.
Coupler release
sound.
Releases the rear coupler when you have addressed a
single unit. Releases the front coupler of the rear unit
when you have addressed a lash-up.
Coupler release
sound.
Activates the numeric keypad.
Air release sound.
Toggles the headlight on and off.
Accelerates the powered locomotive with a clockwise
rotation. Decelerates the powered locomotive with a
counter-clockwise rotation.
Shuts down all PowerMasters on your railroad. Stops all
TrainMaster Command Control-equipped locomotive
sets in operation. Use
HALT
only in emergency situations.
Activates the locomotive set’s horn. Release the button to
discontinue the sound.
Multihorn diesel horn
sound.
Toggles the bell sound on and off.
Mechanical bell
sound.
Changes the locomotive set’s direction. The locomotive set decelerates to a stop and
continues in the opposite direction when you increase the throttle.
Air release sound.
Increases the locomotive set’s speed while the button is pressed. Release the button to
return to the initial speed.
Decreases the locomotive set’s speed while the button is pressed.
Squealing brake
sounds.
15
SET
L
M
H
See pages 17-18 for the
momentum settings.