Certificate 252521-2405769
Project 2405769
Figure No.(75)
LIGHT BULB REPLACEMENT
If light bulb(s) need to be replaced, make sure power is disconnected and grill and light bulbs are completely cool to the touch.
1. Remove screw with a small Phillips screwdriver. Caution: Glass cover
may be loose, ensure the cover is properly supported before completely
removing the screw.
2. There is a metal clip that clamps onto the glass cover and snaps into
the light housing on the screw end. Unsnap the cover by carefully prying
apart the metal clip from the light bulb housing. Once unsnapped, slide
the cover out and away from the housing and set somewhere safe.
3. Remove old light bulb by pulling the bulb out of the housing
(make sure bulb is cool before removal).
4. Using a soft cloth or paper towel, replace new light bulb into the housing
(finger prints left on the bulb may reduce its life). Make sure the metal
prongs on the light bulb slip into the openings in the light housing.
17
LIGHT BULB
HOUSING
GLASS COVER
LIGHT BULB
SCREW