Lion Precision CPL190, Instruction Manual, Page: 14 / 23

14
Making Temperature Measurements
Place temperature probes in positions to take desired measurements. When measuring surface temperatures, solid mechanical
contact is important.
Use Spindle Error Analyzer (SEA) Software to extract temperature readings.
Block Diagram - Temperature
Connections to Temperature Probes
The two wires of each temperature probe are connected according to the chart below. The probes are by nature unpolarized so
there is no differentiation between the two conductors.
Pin
Numbers Connection
Pin
Numbers Connection
1, 9 Probe 1 (T1) 5, 13 Probe 5 (T5)
2, 10 Probe 2 (T2) 6, 14 Probe 6 (T6)
3, 11 Probe 3 (T3) 7, 15 Probe 7 (T7)
4, 12 Probe 4 (T4) 8 No connection
TMP190 Temperature Specifications
1
Accuracy ±1.8 °F@40 °F – 180 °F ±1. 0°C@4°C – 8 2°C
Output Voltage ±10VDC
Measuring Range 40 °F – 180 °F 4 °C – 82 °C
Temperature Probe
Interchangeability Error ±0.2 °F @ 68 °F ±0.1 °C @ 20 °C
1
Shifts as high as 4 °C may occur in high EMI conditions (10 V/m).
1
9
8
15