background image

     

     

FCC Statements of Modular Compliance

FCC NOTICE (FCC ID: Q7V-3F090009X)

This device complies with the rules set forth in Part 15 by the Federal 
Communications Commission. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference
2.  This device must accept any interference received, including interference that may 

cause undesired operation.

Any changes or modifications not expressly approved by Linx Technologies could void 

the user’s authority to operate the equipment.

The EVM-915-DTS module is provided with an inheritable FCC Modular  

Certification. This certification may be inherited in an end-user product, negating the 

need for FCC part 15 intentional radiator testing on this module, provided that the  
following guidelines are met:

1.  An approved antenna must be directly coupled to the module’s RP-SMA connector.
2. 

The module must not be modified in any way. Coupling of external circuitry must not 

bypass the provided connectors.

3. 

End product must be externally labeled with “Contains FCC ID: Q7V-3F090009X”

4.  The end product’s user’s manual must contain an FCC statement equivalent to that 

listed on page 11 of this manual.

5.  The antenna used for this transceiver must not be co-located or operating in  

conjunction with any other antenna or transmitter.

6.  The integrator must not provide any information to the end-user on how to install or 

remove the module from the end-product.

The integrator is required to perform unintentional radiator testing on the final product 

per FCC sections 15.107 and 15.109.

FCC Pre-certified EVM-915-DTS

FCC ID: Q7V-3F090009X

11

10

Preliminary Draft

Preliminary Draft

Brazil Anatel Labeling Requirements

The Brazil version, the EVM-915-250-BZx, has been tested and complies 
with the Anatel regulations for sale in Brazil.

Este equipamento opera em caráter secundário, isto é, não tem 

direito à proteção contra interferência prejudicial, mesmo de estações do 
mesmo tipo, e não pode causar interferência a sistemas operando em 
caráter primário.

 Anatel label

Summary of Contents for EVM-915-DTS Series










Reviews: