Linx 7900 Quick Start Manual Download | Manualshive

Page: 78 / 81

background image

Appendix C: Glossary

FA69315–3 English

65

Linx 5900 & 7900 Quick Start Guide

Appendix C: Glossary

The glossary explains some of the terms that are used in this guide. If the
explanation contains a term that is also described in the glossary, that term
is shown in italics.

Auto Power Down

A function that turns off the printer automatically
when the correct conditions are met.

Current Message

The message that is selected for printing.

Cursor

The marker that shows your current position in a field
or a message (for example, the Message Editor). You
can use the arrow keys to move the cursor to another
position.

Field

A section of a message that you can create and edit
separately from other sections. You use one or more
fields to build a message. The field types include
Text, counters, and Date and Time fields.

Message

The information that is printed.

Print Count

The number of times that a message was printed after
the Print Count was reset.

Print Delay

The distance between the product sensor and the
position at which the printer starts printing the
message.

Print Height

The height of the characters that are printed. You can
adjust the height of the printed characters.

Printer Status

The current state of the printer. The Printer Status
area gives information about the jet state, and the
levels of the ink and the solvent.

Soft key

A key that changes its name and its function
according to which page in the software is displayed.

SureFill

®

code

A code you enter before you can refill the ink or
solvent. The code confirms that the ink or solvent has
not expired and is the correct type for the printer.

Text box

A box that accepts text that you enter from the
keyboard.

«
...
76
77
78
79
80
...
»

Summary of Contents for 7900


















































































Reviews:

No comments

Related manuals for 7900

Brand: T-Verter Pages: 121

Brand: Happy Pages: 10

Brand: IBM Pages: 105

Brand: Samsung Pages: 32

Brand: Manfrotto Pages: 16

Brand: Danfoss Pages: 20

Brand: Danfoss Pages: 36

Brand: Faulhaber Pages: 66

Brand: Watts Pages: 4

Brand: Vag Pages: 15

Brand: National Instruments Pages: 14

Brand: I-Tork Pages: 15

Brand: MGC Pages: 16

GECO LUX GECO60

Brand: GiBiDi Pages: 48

Brand: Engineering Solutions Pages: 34

VBA-2E-G11-I/U/PT100-F

Brand: Pepperl+Fuchs Pages: 24

NovoCon S Digital

Brand: Danfoss Pages: 2

Brand: ISVT Pages: 78

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands