Linx 7900 Quick Start Manual Download

Page: 59 / 81

Chapter 6: Look after your printer

Linx 5900 & 7900 Quick Start Guide

FA69315–3 English

If you use a pigmented ink in the printer, perform this step. If you
do not use a pigmented ink, go to step 6.

Use the brush supplied with the printer to carefully remove any ink
deposits that do not wash off from the circled area only in Figure 6-3.
Brush the deflector plates carefully.

Do not use the brush to clean the nozzle.

CAUTION: Use ONLY the non-abrasive, solvent-resistant brush
supplied with the printer (part number FA940053) to clean the
printhead.

Figure 6-3. Clean the printhead with the brush

6. Allow the printhead to dry completely. Do not use a cloth to dry the

printhead.
You must make sure that the space between the nozzle and the charge
electrode is free of solvent.

7. Refit the printhead into the cover tube and tighten the securing screw.

68124

MIDI

-PLUS

CLEAN ONLY THIS

AREA WITH THE BRUSH.

DO NOT USE THE BRUSH

ON THE NOZZLE

Summary of Contents for 7900


















































































Search results

Summary of Contents for 7900

Reviews:

Related manuals for 7900

Brands by name

Popular brands

Linx 7900, Quick Start Manual

Search results

Summary of Contents for 7900

Reviews:

Related manuals for 7900

Brands by name

Popular brands