Page 4
Page 4
COMPLIANCE REQUIREMENTS (INSTRUCTION MANUAL)
For products containing the FCTN-MD09XXX, it is necessary to include the
following statement in the end product’s instruction manual or insert card.
INSTRUCTIONS TO THE USER
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part I5 of the FCC
R u l e s. These limits are designed to provide reasonabl e
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instru c t i o n s, may cause harm f u l
interference to radio communications. However, there is no
g u a rantee that interference will not occur in a part i c u l a r
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and
receiver.
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician
for help.
In order to maintain compliance with FCC regulations, shielded
cables must be used with this equipment. Operation with non-
approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned
that changes and modifications made to the equipment without
the approval of manufacturer could void the user's authority to
operate this equipment.
Place the above statement in the instruction manual or insert card.
Summary of Contents for FCTN-MD09 Series
Page 5: ...Page 5 Page 5...