LINTECH
–
1 avenue de Norvège
–
91140
–
Villebon sur Yvette
Tél : 01 64 86 70 90
–
Fax : 01 64 86 70 80
Assembly
1.
Bend the spotlights down, so that they are out of the way.
2.
Screw the locking ring all the way on to the optical bracket.
3.
Screw the optical bracket on to the base. Once you have done so, it is likely
the bracket will not be aligned over the base. Unscrew it until it is aligned, and
then turn the locking ring clockwise until it is tight. (After doing so, it will still be possibl
e to hold the base and turn the bracket if sufficient force is applied, but it will not spin
freely.)
4.
Loosen the small thumbscrews on the optical bracket.
5.
Slide the optical stack in to the ring of the optical bracket.
6.
Tighten the thumbscrews to hold the optical stack
in place. If done correctly, you should be able to turn the ridged portion of the
optical stack freely while the rest of it remains in place.
7.
Remove the protective film from the display at the top of the optical stack.
UV filter assembly
Step 1: Materials: Lens cover(transparent); 3M sticker; UV filter
Step 2: Use 3M sticker to stick the UV filter and the lens cover together. The side which
has screw threads on of the filter should be sticked to the lens cover.
