Lint Audio KWELA TONES, Assembly Instructions Manual

Page: 8 / 32

Part 2 - Kit assembly
8
Tools required
It is expected that the kit builder has some soldering experience. Always use a fine tipped soldering iron.
It is not advisable to use a heavy industrial unit.
Use fine solder when assembling.
Some basic tools are required for assembly.
A soldering station, a small screwdriver, small side cutters, pointed nose pliers, a small craft knife and ruler.
A multimeter is advisable to check voltages and polarities. A drilling machine, a 1,5 mm drill bit, 7mm and 6 mm
drill bits are required. A small toothbrush and benzine to clean the pcb after soldering.
A smartphone will aid in determining left and right headphone connections when connecting.
Download a “left and right” app from a app store as this makes it very simple to set the correct speaker
when assembled.
Benzine and a small toothbrush will be required to clean the printed circuit board when complete.
The kit is supplied as a complete package, the assembled kit works and has been in service.
It performs to expectations. A enclosure is not provided.
When assembling, ensure that components are not overheated by poor assembly equipment.
When using soft solder, always wash hands before consuming foodstuffs, avoid contact with lead.