Shenzhen Linshang Technology Co., Ltd.
3/12/2022 Page 4 of 8
remain stable to ensure a very good reproducibility over the complete measuring range.
IV. Operation
1. Power on/off
Power on:
Short press the power button to turn on the gauge. Display the version number and serial number, then
the recorded data of last measurement are displayed after the gauge is turned on.
Power off:
Long press the button to shut down the gauge, or the gauge will automatically shut down in 3 minutes
without any operation.
2. Device setting
In the off state, long press the button for 3s to enter the setting interface.After entering the setting interface,
if there is no operation for more than 20 s, the gauge will automatically shut down.Short press the button
can select the settings; Long press the button for 3 s and less than 5 s to confirm the settings; long press
the button for 5 s, the gauge exits the setting and shuts down and the setting is invalid.
Language settings
The instrument is available in Chinese, English, Russian, Turkish.
Setting method: In the main setting interface, short press power button to select "Language" option, long
press the button for 3 seconds to confirm the selection, short press the button again to select the desired
language, long press the button for 3 seconds to confirm the selection, and return to the main setting
interface.
Setting interface Language selection
Measurement modes selection
There are three measurement modes: Ferrous substrate measurement (Fe), Aluminum substrate
measurement (Al), and Auto identification (Fe/Al). Under normal circumstances, it is enough to use Fe/Al
auto identification mode. This mode features identification of the ferrous putty and galvanized iron
substrate. When the measurement substrate is settled, you can select Fe or Al as the fixed
measurement mode.
