Linsar KY865WHITE, User Manual, Page: 8 / 13

8
Instructions
Instructions
Toasting bread
•
Make sure the crumb tray is properly in place before using the 2 SliceToaster. It
is located underneath the heating elements and can be accessed from the side
of the 2 Slice Toaster opposite the controls.
•
Place the 2 Slice Toaster on an even and heat-resistant surface, connect it to a
properly installed wall socket and switch on power to the outlet.
•
Place two slices of bread into the bread slots.
•
Set the browning level with the browning control knob. The higher the number,
the longer the toasting time and the darker the toast.
•
Push down the toasting lever completely to switch on the 2 SliceToaster. The
lever will only stay down when the 2 Slice Toaster is connected to the power
outlet and the power is switched on.
•
The CANCEL button indicator will illuminate; press it at any time to stop
toasting.
•
NOTE: This 2 Slice Toaster automatically adjusts the slot width when the
toasting lever is pushed down to accommodate slices of different thickness.
•
When the toast is ready, the toasting lever moves up and the 2 Slice Toaster
switches off automatically. You can now remove the bread from the 2 Slice
Toaster.
•
CAUTION: Do not touch the metal parts of the 2 Slice Toaster as they become
hot during toasting.
•
If toasting more bread, allow the 2 Slice Toaster 15 to 20 seconds to cool
down before beginning the next toasting cycle so the electronically controlled
thermostat can reset.
•
After several toasting cycles, pull out the crumb tray and clean it. See the
cleaning instructions on page 11.
Knob position Browning level
1 - 2 For thinly sliced, or slightly dry bread
3 - 5 For fresh, medium thick slices of white or wholemeal bread
6 For frozen, or very thick slices
WARNING!
If bread becomes stuck inside the 2 SliceToaster, unplug the 2 Slice Toaster
and let it cool before trying to remove the bread. Do not use a knife or any
other sharp metal tool to do so, and do not touch the metal parts inside the
2 SliceToaster.