15
MAKE SURE ALL THE EQUIPMENTS AND POWER PLUG ARE
CONNECTED PROPERLY AND THE UNIT IS SET IN CORRECT MODE
BEFORE KINDS OF OPERATIONS.
- Press STANDBY button on the unit or remote control to power ON the unit (indicator
will glow blue); press it again to power OFF (standby mode) the unit (indicator will
glow red).
- Press SOURCE button on the remote control to switch the unit to ATV or DTV mode.
SELECT DESIRED PROGRAM
1. Press P + button to play next channel.
2. Press P- button to play previous channel.
3. Press number buttons on remote control directly to select desired program.
NOTE:
Press -/-- button repeatedly to switch the digit.
VOLUME CONTROL
- Press
(
VOL) +/- to adjust the level of current volume.
Available range: 0-100.
MUTE CONTROL
- Press MUTE button to mute the sound, press it again to turn on the sound.
SOURCE SETTING
- Press SOURCE button on the remote control to display the sources list.
- Press UP or DOWN navigation button to select desired input source, and then press OK
button to confirm selection.
Available options: Digital TV (DTV), Analogue (ATV), Component (YPbPr), AV, SCART,
HDMI 1/2/3,
MULTI AUDIO SETTING
- Press the AUDIO button on the remote control repeatedly to select the desired audio
language.
NOTE:
To enable this function, make sure that the channel you are viewing supports
multi-audio languages.
INFORMATION DISPLAY
- Press the INFO button on the remote control to display information of current programs.
BASIC OPERATIONS
