19
Performance
The Performance section is located on the middle right of SaxLab 2’s Front
Panel. The Performance section features the following controls:
•
Scoop (Amount),
•
PB- (Pitch Bend Down Amount) with Display,
•
PB+ (Pitch Bend Up Amount) with Display,
•
AMP (Amplitude) Depth, Control Source and Control Response Curve,
•
BRI (Brightness) Depth, Control Source, and Control Response Curve
•
REV (Reverb) Depth, Control Source and Control Response Curve
•
GRO (Growl) Depth, Control Source, Control Response Curve,
•
Maximum Depth and Deviation,
•
CT (Crossfade Time) and
•
Monomode.
Scoop (Amount): This control is used to set the amount of time it takes to
move from a lower pitch to the pitch of the note that is actually played.
Increasing the value of the Scoop control increases the time taken for the
pitch to move from the lower pitch to the note that is actually played. Scoop
can be thought of as an auto-bend that is applied at the onset of a note.
Scoop is not applied to notes that are played legato. The scoop is a style
LinPlug SaxLab User Guide 2.0.3
