'
STEP-3 : CONNECT THE FRONT LEG TO SEAT-1A AND SIDE STRETCHER AS SHOWN IN FIGURE-3
3C
FIGURE-3A
FIGURE-3B
3.1 REMOVE THE SHIPPING CLEAT FROM END OF FRONT LEG ASSEMBLY-3C.
3.2 TURN CHAIR AROUND WITH SEAT IN THE WORK SURFACE AS SHOWN IN FIGURE-3B.
3.3 CONNECT FRONT ASSEMBLY-3C TO STRETCHERS 2D AND 2E USING TWO WOOD
SCREWS-G,THEN CONNECT IT TO SEAT-1A USING FOUR FRONT LEG BOLTS-H WITH FOUR
SPRING WASHERS-I, AND FOUR FLAT WASHERS-J AS SHOWN IN FIGURE-3B.
3.4 PLACE FOUR FOOT PAD-M TO THE LEGS OF THE STOOL AS SHOWN.
PAGE 5
