A
08
SCREW 2 3/8"
ALLEN WRENCH
ADHESIVE FELT
01
04
B
C
PAGE 3
PAGE 2
OPEN HARDWARE PACKAGE ON A FLAT SURFACE COVERED WITH NEWSPAPER.
COUNT EACH PIECE OF HARDWARE AND MATCH THE QUANTITY TO THE
HARDWARE LIST COLUMN. CALL CUSTOMER SERVICE IF ANY PARTS ARE MISSING.
FOLLOW THE LETTER IDENTIFICATION WHEN READING THE ASSEMBLY DRAWING
“A" THROUGH "G”.
HARDWARE PACKAGE COUNT.
HARDWARE IDENTIFICATION
IMPORTANT:
USE ALL THE HARDWARE MENTIONED ABOVE TO
ASSURE THE STABILITY AND SAFETY OF THE DESK.
TOOLS REQUIRED
AN ALLEN WRENCH (PROVIDED “B”) AND A PHILLIPS
HEAD SCREWDRIVER (NOT PROVIDED) ARE REQUIRED
TO ASSEMBLE THIS UNIT.
ATTENTION NOTE:
BEFORE USING THIS UNIT, ATTACH (04) ADHESIVE FELTS (C) TO THE BOTTOM OF EACH LEG #02
IN ORDER TO AVOID DAMAGES TO FLOOR.
1 - TABLE TOP
2 - LEG (4x)
PARTS IDENTIFICATION
STEP 1)
1.1. FIX LEG #2 (4x) TO TABLE TOP #1 USING (08) SCREWS (A), AN ALLEN WRENCH
(PROVIDED-”B”) AND THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN ON DRAWING.
ATTENTION:
ASSEMBLE DESK FACING DOWN ON A CLEAN SURFACE (CARPET,
CARTON, ETC...) TO AVOID SCRATCHING THE SURFACE.
SCREW 5/8
02
D
METAL KNOB
01
E
SCREW 3/4
01
F
WASHER
01
G
C
2
2
2
2
1
C
C
C
C
A
B
1
2
2
2
2
A
