B
D
C
A
Assembly Step 1
Open the carton and place all the parts onto a clean surface. Unpack all hardware packages.
Place the Bottom Seat Panel (E) with its mounting positions, facing upwards, attach Front Left Leg (A)
to Bottom Seat Panel (E) using Short Bolt (3), Ring Washers (2), Nut (5), Cap Nut (1) and tighten using
Allen Key (7) and Wrench (6). Repeat the same process with Front Right Leg(B), Back Left Leg (C) and
Back Right Leg(D). Do not fully tighten the Bolts.
Stand the Bottom Seat Panel (E) upright. Assemble the Middle Side Panel first, by attaching Middle
Left Side Panel (F) and Middle Right Side Panel (G), using Long Bolt (4), Ring Washers (2), Nut (5),
Cap Nut (1) and tighten using Allen Key (7) and Wrench (6). And then Assemble the Middle Side
Panels to the Bottom Seat Panel (E) by aligning the end pipes on the Middle Side Panels to the end
pipes of Bottom Side Panel (E), then using Long Bolt (4), Ring Washers (2), Nut (5), Cap Nut (1) and
tighten using Allen Key (7) and Wrench (6). Do not fully tighten the Bolts.
Caution: Two or Three adults required for assembly at this step
Assembly Step 2
7
3
2
2
5
6
E
G
F
E
7
4
2
2
5
6
7
4
2
2
5
6
G
F
1
1
7
4
2
5
6
1
2
