Lino PL3 TCT2 V, Installation Manual

Page: 104 / 128

EN
104
Problem Possible Cause Solution
Hob control card’s display
is blacked out. The hob or
cooking zones cannot be
switched on.
There is no power supply.
Check the household fuse for the
appliance. Check whether there is a
power cut by trying other electronic
appliances.
The hob switches o ff while it
is in use and an “F“ fl
ashes on
each display.
The controls are damp
or an object is resting on
them.
Dry the controls or remove the object.
The hob switches o ff while it
is use.
One of the cooking zones
has been on for too long.
You can use the cooking zone again by
switching it back on.
The hob controls are not
working and the child lock
LED is on.
The child lock is active. Switch o ff
the child lock.
6. TROUBLESHOOTING &TRANSPORT
6.1 Troubleshooting
If you still have a problem with your appliance after checking these basic trouble-
shooting steps, please contact an authorised service person or quali
fi
ed technician.
6.2 Transport
If you need to transport the product, use the original product packaging and carry it
using its original case. Follow the transport signs on the packaging. Tape all indepen-
dent parts to the product to prevent damaging the product during transport.
If you do not have the original packaging, prepare a carriage box so that the appli-
ance, especially the external surfaces of the product, is protected against external
threats.