Lino PL3 TC4MAX V, Installation Manual

Page: 103 / 128

EN
103
• If substances with a low melting point
are used in the cookware’s base
or coatings, they can damage the
vitroceramic cooktop. If plastic, tin foil,
sugar or sugary foods have fallen on
the hot vitroceramic cooktop, please
scrape it o
ff the hot surface as quickly
and as safely as possible. If these
substances melt, they can damage
the vitroceramic cooktop. When you
cook very sugary items like jam, apply
a layer of a suitable protective agent
beforehand if it is possible.
• Dust on the surface must be cleaned
with a wet cloth.
• Any changes in colour to the ceramic
glass will not a ff ect the structure or
durability of the ceramic and is not
due to a change in the material.
Colour changes to the ceramic glass
may be for a number of reasons:
1.
Spilt food has not been cleaned o ff
the
surface.
2.
Using inappropriate utensils on the
hob will damage the surface and may
cause the cracking of the glass.
3.
Using the wrong cleaning materials.
6. TROUBLESHOOTING
&TRANSPORT
6.1 Troubleshooting
If you still have a problem with your ap-
pliance after checking these basic trou-
bleshooting steps, please contact an
authorised service person or quali fi
ed
technician.
Problem Possible Cause Solution
Hob control card’s display
is blacked out. The hob or
cooking zones cannot be
switched on.
There is no power supply.
Check the household fuse for the
appliance. Check whether there is a
power cut by trying other electronic
appliances.
The hob switches o ff while it
is in use and an “F“ fl
ashes on
each display.
The controls are damp
or an object is resting on
them.
Dry the controls or remove the object.
The hob switches o ff while it
is use.
One of the cooking zones
has been on for too long.
You can use the cooking zone again by
switching it back on.
The hob controls are not
working and the child lock
LED is on.
The child lock is active. Switch o ff
the child lock.