EN
129
Save Power Mode
To activate or deactivate save power
mode, follow the below steps:
1. Open the door and press Half Load
(and Delay
(4)
buttons simultaneously
for 3 seconds.
2. After 3 seconds, the machine will dis-
play last setting.
3. When Save Power Mode is activate
P1
,
P2
,
1/2
leds illuminate. On this mode
the machine will turn o
ff
after 15 minutes
of no activity in order to save energy.
4. When Save Power Mode is deactivat
P1
,
P2
leds illuminate. If Save Power
Mode is deactive the machine will al-
ways be on unless it is turned o
ff
by user.
5. To save the selected setting, turn o
ff
the machine.
In factory setting, Save Power Mode is
active.
7. CLEANING AND
MAINTENANCE
Cleaning your dishwasher is important
to maintain the machine’s service life
Make sure that the water softening set-
ting (If available) is done correctly and
correct amount of detergent is used to
prevent limescale accumulation. Re
fi
ll
the salt compartment when the salt sen-
sor light comes on.
Oil and limescale may build up in your
Dishwasher over time. If this occurs:
• Fill the detergent compartment
but do not load any dishes. Select
a programme which runs at high
temperature and run the Dishwasher
empty. If this does not clean your
Dishwasher
su
ffi
ciently,
use
a
cleaning agent designed for use with
dishwashers.
• To extend the life of your dishwasher,
clean the appliance regularly on each
month
• Wipe the door seals regularly
with a damp cloth to remove any
accumulated residue or foreign
objects.
7.1 Filters
Clean the
fi
lters and spray arms at least
once a week. If any food waste remains
or foreign objects on the coarse and
fi
ne
fi
lters, remove them and clean them
thoroughly with water.
a) Micro Filter
b) Coarse Filter
c) Metal Filter
